Spring Cone Crusher Application:

Spring Cone Crusher has a long history, stable performance, be widely used in metallurgical industry, building materials industry, road building industry, chemical industry and silicate industry, apply to broken above the middle-and middle-hardness of various minerals and rocks. My company’s product structure is novel, unique, simple and reasonable, running balance, running cost is low. Breaker’s body is cast steel structure, it settings stiffener in heavy site. Crusher drive shaft at both ends with tapered roller bearings, power-driven by a heavy bevel gear to complete. Crusher contains hydraulic adjusting structure, easy to quickly adjust the size of the crusher discharge port.

Spring Cone Crusher Benefits:

1, spring cone crusher has a large of crushing force, high efficiency, high capacity, operation, low cost, easy to adjust, the use of economic and other characteristics;
2, due to parts selection and structure design is reasonable, so have long life to use, while the broken products have uniform particle size, reducing the cycle load;
3, spring cone crusher is sealed by grease seal, avoid the drawbacks of the water supply and drainage system easy to plug and the deficiencies of water and oil easy to mix;
4, spring insurance system is overload protection device allowing the foreign body or iron through the crushing chamber without detriment to the crusher;
5, broken machine has a lubrication system which contain external, including pumps, tanks, pipeline. When the oil temperature is too high or too slow the oil flow will automatically shut down the crusher.

Spring Cone Crusher Working Principle:

Cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening. During operation, the motor drives the eccentric shaft shell to turn around through ahorizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.

Spring Cone Crusher Specification:

Model		weight (T)	power	diameter of cone crusher at big end(mm)	max feeding size	adjustment range of discharge opening	capacity (t/h)
PYB	900	11.2	55	Ф900	115	15-50	60-105
PYZ				Ф900	60	5-20	50-90
PYD				Ф900	50	3-13	15-50
PYB	1200	35	130	Ф1200	145	20-50	110-168
PYZ				Ф1200	100	8-25	42-135
PYD				Ф1200	50	3-15	18-105
PYB	1750	50.3	160	Ф1750	215	25-50	280-480
PYZ		50.3		Ф1750	185	10-30	115-320
PYD		50.2		Ф1750	85	5-13	75-230
PYB	2200	80	260 280	Ф2200	300	30-60	590-1000
PYZ				Ф2200	230	10-30	200-580
PYD				Ф2200	100	5-15	125-350